Now you can order a complete EFI System with a variety of fuel delivery options in kits that include everything you need for installation. All popular FiTech EFI Systems are now packaged with one of four different fuel delivery options: Inline Fuel Pump, Fuel Command Center, Hy-Fuel or G-Surge.
The Go EFI 4 Self Tuning Fuel Injection is rated at 600 HP but is suitable for engines from 250 HP thru 600 HP. This system is perfect for your everyday Driver right up to your weekend Street Machine or Bracket Racer. It features the FASTEST most accurate Self Learning available, Timing control, Wet flow Annular discharge and tons of additional features.
It fits any 4-bbl intake manifold and is the most self-contained and full-featured unit of this type. The ECU (computer) is mounted on the throttle body, which greatly simplifies installation. No hole in your firewall and no unsightly harness draped across your engine. This is also the only computer mounted throttle body that offers spark control without the need for an external spark box or special distributor. It also has a built-in fuel pressure regulator. A hand-held controller features a touch screen for quick and easy initial set-up.
The Fuel Delivery Kit includes an EFI grade 255 L/PH inline external fuel pump that is suitable for engines making up to 600 HP. (Note that some of our EFI kits are limited to less than 750 HP due to maximum usable injector sizes). This kit also includes 20-feet of EFI grade fuel hose suitable for both the inlet and return lines between the fuel tank and the engine. The kit includes two billet fuel filters. The filters include a 100 micron pre-filter and a 30 micron post filter. The hose and hose ends are push lock style for easy assembly. The hose is high pressure EFI grade.
Kit Includes:
Die Cast Throttle Body
Handheld Controller
Windshield Mount
(4) Hi-Flow 600 HP injectors
Built-in pressure regulator
2.5 BAR Internal MAP Sensor
Throttle Position Sensor
Idle Air Control
Coolant Temp Sensor
Wide band O2 Sensor
O2 Bung Kit
-06AN Fuel Inlet Fitting
Gasket Kit
| Inline Fuel Pump |
255 L/PH External Inline Pump
EFI Pre and Post Fuel Filters
20′ of -6 Hose
5′ of -8 Hose
Fittings
Mounting Brackets
|
| Fuel Command Center |
Sump Tank Assembly w/340 L/PH Fuel Pump, Regulator and Pressure Gauge
Hose and Fittings
EFI Fuel Filter
|
| Hyperfuel G-Surge Tank |
Hyperfuel G-Surge Main Assembly |
| Hy-Fuel In-Tank Module |
Hy-Fuel Pump Main Assembly
58 PSI Fuel Regulator
Extension Shaft
Hy-Fuel Outer Ring (Red)
Hy-Fuel Inner Ring (Black)
340 L/PH Fuel Pump
(16) #10-32×1″ Flat Head Machine Screws
(8) #10-32×1.75″ Flat Head Machine Screws
(8) #10-32×1.5″ Flat Head Machine Screws
(8) #10-32 Keps Nuts and #10 Flat Washers
EFI Grade 5/16″ Hose and (2) Hose Clamps
(3) Electrical Connectors, Nuts, Washers and Rubber Boots
OEM Style Filter
1/4″ Drill Bit
O-ring
|
| Hy-Fuel Tight-Fit In-Tank Module |
Hy-Fuel Pump Main Assembly
Return Tube
Foam Gasket
Hy-Fuel C Ring (Red)
255 L/PH Fuel Pump
(6) M5-0.8x25mm Hex Head Machine Screws
(6) M5-0.8x25mm Countersunk Head Machine Screws
(6) M5-0.8 Keps Nuts
EFI Grade 5/16″ Hose and (1) Hose Clamp
(2) Electrical Connectors, Nuts, Washers and Rubber Boots
Filter Sock
(2) Cable Clamps
|
WARNING:
This product can expose you to chemicals,
which are known to the State of California to cause cancer.
For more information, visit www.P65Warnings.ca.gov.
