Use this bar to show information about your cookie policy.
Roll over image to zoom inClick on image to zoom
/
Description
The 1965–1966 Chevy Impala, Biscayne, and Bel Air Fuel Injection Fuel Tank Kit is a comprehensive, bolt-in solution for owners upgrading their classic B-Body to EFI. Engineered to look like an original equipment (OE) tank once installed, this system hides a high-performance GPA-Series fuel pump module and a sophisticated baffling system designed to handle the rigors of Pro-Touring, Autocross, or spirited street driving.
EFI-Ready Engineering
Unlike a standard replacement tank, this unit is purpose-built to meet the high-pressure demands of modern fuel injection:
Advanced Internal Baffling: Features an extra-large 4.8-liter dual-tube baffled fuel tray. This reservoir is critical for preventing fuel pump starvation during hard acceleration, heavy braking, or high-speed cornering.
Recessed Mounts: Both the fuel pump and the sender unit are recessed into the top of the tank. This provides necessary clearance for fuel lines and wiring without requiring any modifications to your trunk floor or car body.
Increased Capacity: This tank holds 24 gallons and is 1" deeper than the stock unit. To accommodate this, the kit includes extended mounting straps.
Premium In-Tank Pump & Sender
Genuine Walbro Pumps: The kit utilizes Walbro (TI Automotive) pumps, an OE-validated brand known for superior hot-fuel handling and rapid recovery from aeration.
Performance Options: You can choose between a 255 LPH (supporting moderate builds) or a 400 LPH pump (supporting up to approximately 1,000 HP).
Versatile Fuel Senders: The system uses an aftermarket 5-bolt sender (6" length). Multiple Ohm ranges are available to match your specific gauges, including the factory 0–90 Ohm (TAN-GML) range for 1965-up GM vehicles.
Heavy-Duty Construction
Corrosion Resistance: The tank is made from coated galvanized steel and finished with a durable Silver Powder Coat.
Leak-Proof Fittings: All fittings are oven-brazed and the mounting plate is a heavy 10-gauge no-warp design with yellow-zinc plating.
System Specs: Designed to handle up to 100 PSI; includes 1/4" NPT supply and return lines plus a barbed vent fitting.
What's in the Box?
EFI-ready fuel tank (37-1/4" x 30" x 7-3/4").
GPA-Series fuel pump module (including filter sock and internal harness).
Fuel level sending unit (Ohm range specified at purchase).
2-piece neck design with rubber connector hose.
Extended galvanized tank straps and mounting hardware.
Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.
Estimate shipping
Refund Policy
We offer a 30-day return policy, which means you have 30 days from the date you receive your item to request a return.
Eligibility for Returns
To be eligible for a return, your item must be:
In the same condition as received
Unworn or unused
With original tags attached
In its original packaging
You must also provide a receipt or proof of purchase.
How to Start a Return
To initiate a return, please contact us at jonathon@hotrodhardware.com. Once your return request is approved, you will be provided with the return address and, if applicable, an RMA (Return Merchandise Authorization) number.
Important: Items sent back without prior authorization will not be accepted.
If you have any questions regarding your return, feel free to contact us at the email above.
Damages and Issues
Please inspect your order upon delivery. If your item is defective, damaged, or if you received the wrong item, contact us immediately so we can evaluate the issue and resolve it promptly.
Exceptions / Non-Returnable Items
The following items are not eligible for return:
Custom or personalized products (including special orders)
Hazardous materials, flammable liquids, or gases
Sale items
Gift cards
If you are unsure whether your item qualifies, please contact us before initiating a return.
Exchanges
The fastest way to receive a replacement item is to return your original item (once approved) and place a new order separately.
Free Shipping Orders
Orders that qualified for free shipping are subject to deduction of the original outbound shipping cost if the item is returned.
Refunds
Once your return is received and inspected, we will notify you regarding the approval status of your refund.
If approved:
Refunds will be issued to your original payment method
Any applicable restocking fees will be deducted
Original shipping charges (if applicable) will be deducted
Return shipping costs (if arranged by Hot Rod Hardware) will be deducted
Please note:
Payment processing fees (including PayPal, Amazon Pay, or other merchant fees) are non-refundable
It may take additional time for your bank or credit card provider to process and post the refund
