Bolt on with running board brackets... Cut 1.5" hole in splash apron... Install Grommet and billet cap plug... Plumb and wire... Done!
The 1-3/4" diameter Billet Cap-Plugs & Grommets are included with both Model A fuel tank kits. To fill your saddle tanks, remove billet cap-plug, insert fuel nozzle through grommet and into the push-thru cap. it will open to let fuel pass through. When finished remove the fuel nozzle and the push-thru cap shuts. Now just insert the Billet plug and you're finished.
Works on cars and trucks.
NOTE:The 1928-29 Ford Model A saddle fuel tanks are not recommended for Fuel Injected cars & trucks. Photo is shown with optional fuel senders. The size of each tank is 38" x 7-3/4" x 9-1/2". Each tank requires its own 5 bolt hole fuel sending unit.
Since these tanks bolt to the outside of the frame the original mechanical brakes can not be used with these tanks.

WARNING:
This product can expose you to chemicals,
which are known to the State of California to cause cancer.
For more information, visit www.P65Warnings.ca.gov.